Journal

Materials

Why we keep coming back to lime plaster

Nguyễn Thu HàAugust 2026· 6 min read

It breathes through Hanoi’s wet season, softens every edge of light, and repairs with a damp cloth. After ten years, it is still the first material we specify.

Every March, somebody calls us about mould. The paint has blistered behind the wardrobe, the corner of the bedroom has turned grey, and the wall smells of the rain. In Hanoi, where the air sits at ninety per cent humidity for weeks at a time, a sealed wall is a wall that sweats.

A wall that breathes

Lime plaster is porous. It takes moisture in when the air is heavy and gives it back when the air dries, so water never settles on the surface long enough to feed anything. It is also naturally alkaline, which mould does not like.

We do not choose lime because it is old. We choose it because it is still the best answer to our climate.

What it does to light

Three coats, trowelled by hand, leave a surface that is never quite flat. Morning light rakes across it; lamplight pools in it. A room plastered in lime looks different at every hour, which is exactly what a painted wall cannot do.

  • Base coat of lime and coarse sand, left to cure for a week
  • Two finishing coats, pigmented with local earth
  • No sealer — a wax only in kitchens and bathrooms

Living with it

Lime marks, and that is part of it. A scuff comes off with a damp cloth; a chip is patched with a spoonful from the same batch. After a few years the walls take on a patina that we have never managed to fake.

Light across a trowelled wall, late afternoon
Fig. 02 —Light across a trowelled wall, late afternoon

Begin

Tell us about the room you want to live in

A first conversation is free and takes about an hour — at the studio, on site, or over a call.

Fig. 09 — Guest room, The Linen House